As a more important rotating part in the whole machine, the running state of bearings should be paid attention to from time to time, because early detection of bearing failure is helpful to the equipment shutdown caused by the damage of tapered roller bearings, thus causing serious losses to users.

But in practice, not all cases can have advanced instruments to monitor the state of tapered stick bearings. In this case, operators must be highly alert through rich experience, and can judge from noise, temperature, vibration and so on.

Of course, the assembly of tapered stick bearings is also crucial, we must keep the bearings and their surrounding environment clean, once there is dust, it will lead to bearing wear. When using and installing, it is important to carefully and accurately install the tapered roller bearings. It is important not to allow strong stamping and hammer tapping directly on the bearings, so as to avoid damage to the tapered roller bearings.

Whether it is installation or disassembly, special tools should be used as far as possible to avoid the use of cloth and staple fibers and other things. Otherwise, the normal operation of tapered roller bearings may be adversely affected, and usually lead to more serious consequences.

Even though tapered roller bearings are made of high-quality steel, they are afraid of water, so when taking tapered roller bearings by hand, they must be kept dry and coated with high-quality mineral oil before operation. And in the rainy season and summer, we should pay attention to the tapered roller bearings do a good job of anti-rust treatment, in order to avoid rust.

In order to choose the right fit, we must know the actual load conditions, working temperature and other requirements of tapered roller bearings. In the case of difficulty, the choice of fit is generally based on the use of intensive research.